DINIS

dateright.gif (166 bytes)  

DINIS Modules Operation


The following courses are on offer :

 


Course Code : DSQL

DINIS(E) Structured Query Language Module.

Course Duration:

1 day

Course Description:

The DINIS(E) Structured Query Language Module training course is designed to give an overview of the operation of the Structured Query Language Module of the DINIS(E) product.

 

Course Content:

  • Starting DSQL.
  • DSQL 'Help' Facilities.
  • Interrogating the DINIS Database.
  • DSQL Report Generation
  • Conditional DSQL Enquiries.
  • DINIS Database Modification with DSQL.
  • Saving Database Changes with DSQL.
  • Examples of DSQL.
  • DSQL Macros.
  • Master Network Modification.

Prerequisites:

As DSQL is a non-graphical interface to the DINIS(E) database, attendance on the relevant Introduction to DINIS(E) - Part 1 training course or a similar level of experience of the DINIS(E) product may be found to be useful, though this is not essential.

Attendance on the UNIX Overview for DINIS Users training course or a similar level of basic experience of Unix will be found to be beneficial.

 

Further Training:

For the DINIS(E) User:

The DINIS(E) Engineering Principles Seminar covers the basic engineering principles of the DINIS(E) product.

The DINIS(E) Modules Engineering Principles Seminar covers an overview of the basic engineering principles behind the additional modules of the DINIS(E) product.

For the DINIS(E) System Administrator:

For the initial setting up and day to day administration of a DINIS(E) system the DINIS(E) System Administration course is available.

Fujitsu Services also offer an extensive range of Sun Unix training courses, for the full training of those users with a responsibility for the running of the Sun computer system.

Return To Top



Course Code : D6LM

DINIS(E) Load Management Module.

Course Duration:

1 day

Course Description:

The DINIS(E) Load Management Module training course is designed to give an overview of the operation of the Load Management Module of the DINIS(E) product. It is particularly aimed at the practising Engineers with a responsibility for planning Load Management.

 

Course Content:

  • Manual Load Management Analysis.
  • Load Management Time Switches
  • Load Management Growth Circuit Display
  • Load Management 'Snap Shot' Analysis
  • Load Management Automatic Sequence Analysis
  • Load Management with Reliability
  • Load Management by Geographic Area
  • Load Management Parameters
  • Automatic Switching Scheduling
  • Load Management Report Generation Facilities

Prerequisites:

Attendance on the Introduction to DINIS(E) - Part 1 training course or a similar level of experience of the DINIS(E) product is required.

 

Further Training:

For the DINIS(E) User:

 

  • The DINIS(E) Engineering Principles Seminar covers the basic engineering principles of the DINIS(E) product.
  • The DINIS(E) Modules Engineering Principles Seminar covers an overview of the basic engineering principles behind the additional modules of the DINIS(E) product.
For the DINIS(E) System Administrator:

 

  • For the initial setting up and day to day administration of a DINIS(E) system the DINIS(E) System Administration course is available.
  • Fujitsu Services also offer an extensive range of Sun Unix training courses, for the full training of those users with a responsibility for the running of the Sun computer system.
  • DINIS(E) uses the X Window system and attendance on the X Window System - An Overview will assist the DINIS(E) System Administrator to gain the maximum benefit from their system.
Return To Top



Course Code : D6PC

DINIS(E) Protection Co-ordination Module.

Course Duration:

1 day

Course Description:

The DINIS(E) Protection Co-ordination Module training course is designed to give an overview of the operation of the Protection Co-ordination Module of the DINIS(E) product. It is particularly aimed at the practising Protection Engineer.

 

Course Content:

  • Fuse Operation.
  • Fuse Operation Characteristics.
  • Fuse Minimum Operating Currents.
  • Auto Recloser Device Operation.
  • Auto Recloser Device Operation Characteristics.
  • Auto Recloser Device Minimum Operating Currents.
  • Miniature Circuit Breaker Device Operation.
  • Miniature Circuit Breaker Device Operation Characteristics.
  • Miniature Circuit Breaker Device Minimum Operating Currents.
  • Relay CT primary current.
  • Relay Plug Setting Multiplier.
  • Relay Saturation Current.
  • Relay Plug Settings.
  • Relay Time Setting.
  • Relay Downstream Protection Margin.
  • Relay Protection Levels.
  • Relay Inter-tripping.

Prerequisites:

Attendance on the Introduction to DINIS(E) - Part 1 training course or a similar level of experience of the DINIS(E) product is required.

 

Further Training:

For the DINIS(E) User:

 

  • The DINIS(E) Protection Co-ordination - Engineering Seminar gives comprehensive detail on the theory and principles of this module.
  • The DINIS(E) Engineering Principles Seminar covers the basic engineering principles of the DINIS(E) product.
  • The DINIS(E) Modules Engineering Principles Seminar covers an overview of the basic engineering principles behind the additional modules of the DINIS(E) product.
For the DINIS(E) System Administrator:

 

  • For the initial setting up and day to day administration of a DINIS(E) system the DINIS(E) System Administration course is available.
  • Fujitsu Services also offer an extensive range of Sun Unix training courses, for the full training of those users with a responsibility for the running of the Sun computer system.
Return To Top



Course Code : D6TS

DINIS(E) Transient Stability Module.

Course Duration:

2 days

Course Description:

This training course is designed to give an overview of the options for simulating and modelling the effects of Transient Stability in the Optional Module of Version 6 of the DINIS(E) product.

 

Course Content:

  • Motor Start with Linear Load.
  • Motor Start - Quadratic Load.
  • Basic Motor Start - Impedance Variation.
  • Autotransformer Motor Start.
  • Korndorffer Motor Start.
  • Star-Delta Motor Start.
  • Pole Switching Motor Start.
  • Rotor Resistance Motor Start.
  • Multiple Motor Operation - Motor Starting.
  • Multiple Motor Operation - Fault Recovery.
  • Multiple Motor Operation - Fault Contribution.
  • Generator Controls - Governors.
  • Generator Controls - A.V.R.
  • Embedded Generation - Loss of Synchronous Stability.
  • Embedded Generation - Fault Recovery.
  • Embedded Generation - Pole Slipping.
  • Embedded Generation - Coarse Synchronising.
  • E.H.V. System Stability - Area Interconnection.

Prerequisites:

Attendance on the Introduction to DINIS(E) - Part 1 training course or a similar level of experience of the DINIS(E) product is required.

 

Further Training:

For the DINIS(E) User:

 

  • The DINIS(E) Transient Stability - Engineering Seminar give comprehensive detail on the theory and principles of this module.
  • The DINIS(E) Engineering Principles Seminar covers the basic engineering principles of the DINIS(E) product.
  • The DINIS(E) Modules Engineering Principles Seminar covers an overview of the basic engineering principles behind the additional modules of the DINIS(E) product.
For the DINIS(E) System Administrator:

 

  • For the initial setting up and day to day administration of a DINIS(E) system the DINIS(E) System Administration course is available.
  • Fujitsu Services also offer an extensive range of Sun Unix training courses, for the full training of those users with a responsibility for the running of the Sun computer system.
Return To Top



Course Code : D6ULF

DINIS(E) Unbalanced Load Flow Analysis.

Course Duration:

2 days

Course Description:

This training course is designed to give an overview of the options for simulating and modelling unbalanced load flow analysis in the Optional Module of Version 6 of the DINIS(E) product.

 

Course Content:

  • DINIS Unbalanced Load Flow Data.
  • Basic Unbalanced Load Flow Analysis
  • Unbalanced Load Flow Analysis Filters
  • Phase Connection Display, and Checking.
  • Transformer Phase Shifting and Balancing.
  • Utilising Existing Balanced DINIS Data.
  • Modifying Existing Balanced DINIS Data.
  • Re-phasing Using Two Phase Optimisation.
  • Basic Load Allocation.
  • Load Allocation by Phase.
  • Load Category Selection
  • Comparison of Balanced and Unbalanced Analysis.
  • Compound Lines
  • Mutual Coupling Between Lines.
  • Co-Generation Modelling.

Prerequisites:

Attendance on the Introduction to DINIS(E) - Part 1 training course or a similar level of experience of the DINIS(E) product is required.

 

Further Training:

For the DINIS(E) User:

 

  • The DINIS(E) Engineering Principles Seminar covers the basic engineering principles of the DINIS(E) product.
  • The DINIS(E) Modules Engineering Principles Seminar covers an overview of the basic engineering principles behind the additional modules of the DINIS(E) product.
For the DINIS(E) System Administrator:

 

  • For the initial setting up and day to day administration of a DINIS(E) system the DINIS(E) System Administration course is available.
  • Fujitsu Services also offer an extensive range of Sun Unix training courses, for the full training of those users with a responsibility for the running of the Sun computer system.
  • DINIS(E) uses the X Window system and attendance on the X Window System - An Overview will assist the DINIS(E) System Administrator to gain the maximum benefit from their system.
Return To Top



Course Code : D6ALM

DINIS(E) Automatic Loss Minimisation Module.

Course Duration:

1 day

Course Description:

The DINIS(E) Automatic Loss Minimisation Module training course is designed to give an overview of the operation of the Automatic Loss Minimisation Module of the DINIS(E) product.

 

Course Content:

  • Initial Criteria.
  • Analysis Criteria.
  • Localities.
  • Backfeeds.
  • Summation Node Switching.
  • Null Symbol Switching.
  • Exact Verification.
  • Overload Margins.
  • Basic ALM Analysis and Results Display.
  • Circuit Violation Handling.
  • Constraint Handling.
  • Initial Analysis Parameters.
  • Load Flow Parameters.
  • Display Parameters.
  • Locality Display.
  • Null Node Switching.
  • Backfeed Handling.
  • Summation Node Switching.
  • Distinct Current Nulls.

Prerequisites:

Attendance on the Introduction to DINIS(E) - Part 1 training course or a similar level of experience of the DINIS(E) product is required.

 

Further Training:

For the DINIS(E) User:

 

  • The DINIS(E) Engineering Principles Seminar covers the basic engineering principles of the DINIS(E) product.
  • The DINIS(E) Modules Engineering Principles Seminar covers an overview of the basic engineering principles behind the additional modules of the DINIS(E) product.
For the DINIS(E) System Administrator:

 

  • For the initial setting up and day to day administration of a DINIS(E) system the DINIS(E) System Administration course is available.
  • Fujitsu Services also offer an extensive range of Sun Unix training courses, for the full training of those users with a responsibility for the running of the Sun computer system.
  • DINIS(E) uses the X Window system and attendance on the X Window System - An Overview will assist the DINIS(E) System Administrator to gain the maximum benefit from their system.
Return To Top



Course Code : D6FSP

DINIS(E) Fault Study Package Module.

Course Duration:

1 day

Course Description:

The DINIS(E) Fault Study Package Module training course is designed to give an overview of the operation of the Fault Study Package Module of the DINIS(E) product.

 

Course Content:

  • Phase 1 Overview.
  • Phase 2 Overview.
  • Phase 3 Overview.
  • Phase 4 Overview.
  • Phase 5 Overview.
  • Basic Analysis Operation.
  • Phase 1 Operation and Parameters.
  • Phase 2 Operation and Parameters.
  • Phase 3 Operation and Parameters.
  • Phase 4 Operation and Parameters.
  • Phase 5 Operation and Parameters.

Prerequisites:

Attendance on the Introduction to DINIS(E) - Part 1 training course or a similar level of experience of the DINIS(E) product is required.

 

Further Training:

For the DINIS(E) User:

 

  • The DINIS(E) Engineering Principles Seminar covers the basic engineering principles of the DINIS(E) product.
  • The DINIS(E) Modules Engineering Principles Seminar covers an overview of the basic engineering principles behind the additional modules of the DINIS(E) product.
For the DINIS(E) System Administrator:

 

  • For the initial setting up and day to day administration of a DINIS(E) system the DINIS(E) System Administration course is available.
  • Fujitsu Services also offer an extensive range of Sun Unix training courses, for the full training of those users with a responsibility for the running of the Sun computer system.
  • DINIS(E) uses the X Window system and attendance on the X Window System - An Overview will assist the DINIS(E) System Administrator to gain the maximum benefit from their system.
Return To Top



Course Code : D6DLA

DINIS(E) Distributed LV Load Allocation Module.

Course Duration:

1 day

Course Description:

The DINIS(E) Distributed Low Voltage Load Allocation Module training course is designed to give an overview of the operation of the Distributed Low Voltage Load Allocation Module of the DINIS(E) product.

 

Course Content:

  • Allocation defaults.
  • Network Regulation Profile Parameters.
  • Reallocate Point Loads.
  • Reset Point Loads.
  • Reset Line Loading Factors.
  • Tune Line Loading Factors.
  • Basic DLV Load Allocation.
  • DLV Load Allocation Analysis Tolerance.
  • Minimum Length Parameters.
  • Power Factor.
  • Diversity Factor.
  • Line Load Factor.
  • Line Load Factor Tolerance.
  • Reset Line Loading Factors.
  • Tune Line Loading Factors.
  • Reallocate Point Loads.
  • Reset Point Loads.
  • VPrime.

Prerequisites:

Attendance on the Introduction to DINIS(E) - Part 1 training course or a similar level of experience of the DINIS(E) product is required.

 

Further Training:

For the DINIS(E) User:

 

  • The DINIS(E) Engineering Principles Seminar covers the basic engineering principles of the DINIS(E) product.
  • The DINIS(E) Modules Engineering Principles Seminar covers an overview of the basic engineering principles behind the additional modules of the DINIS(E) product.
For the DINIS(E) System Administrator:

 

  • For the initial setting up and day to day administration of a DINIS(E) system the DINIS(E) System Administration course is available.
  • Fujitsu Services also offer an extensive range of Sun Unix training courses, for the full training of those users with a responsibility for the running of the Sun computer system.
  • DINIS(E) uses the X Window system and attendance on the X Window System - An Overview will assist the DINIS(E) System Administrator to gain the maximum benefit from their system.
 
2002  Fujitsu Services
all rights reserved. reproduction in whole or in part without written permission is strictly prohibited.
Top